Avaya Communication Manager Administrator's Manual page 420

Managing Data Calls
Data Call Setup
Table 8: Call-progress messages 2 of 2
Message
CHECK OPTIONS
XX IN QUEUE
PROCESSING
TIMEOUT
FORWARDED
INCOMING CALL
INVALID
ADDRESS
WRONG ADDRESS
PLEASE ANS-
TRANSFER
CONFIRMED
OTHER END
DISCONNECTED
WAIT
WAIT, XX IN
QUEUE
DCP data modules
Data-terminal dialing
DCP data-terminal dialing allows a user to set up and disconnect data calls directly from a data terminal
as follows.
1
At the DIAL: prompt, the user types the data number. The message RINGING displays.
2
If the call is queued, the message WAIT, XX IN QUEUE displays. The queue position XX
updates as the call moves up in queue.
3
To originate and disconnect a call, the user presses BREAK. If the terminal does not generate a
2-second continuous break signal, the user can press originate/disconnect on the data module.
4
The user can enter digits at the DIAL: prompt.
420
Application Meaning
DCP, BRI Data-module options are incompatible.
DCP, BRI Current position in queue.
DCP, BRI Out of queue. Facility is available.
DCP, BRI Time is exceeded. Call terminates.
DCP, BRI Equivalent to redirection-notification signal.
Called terminal activates Call Forwarding
and receives a call, and call is forwarded.
DCP, BRI Equivalent to ringing.
DCP Entered name is not in alphanumeric-dialing
table.
BRI Entered name is not in alphanumeric-dialing
table.
DCP, BRI Originating telephone user transferred call to
data module using One-Button Transfer to
Data.
DCP Data Call Return-to-Voice is occurring.
DCP, BRI Equivalent to confirmation tone. Feature
request is accepted, or call has gone to a local
coverage point.
DCP, BRI Endpoint has terminated call.
DCP, BRI Call is disconnected.
DCP, BRI Normal processing continues.
DCP Call is in a local hunt-group queue.
Administrator's Guide for Avaya Communication Manager
2 of 2
November 2003