Avaya Communication Manager Administrator's Manual page 357

8
In the
Outgoing Dial Type
This field tells Communication Manager how digits are to be transmitted for outgoing calls.
Entering tone actually allows the trunk group to support both DTMF and rotary signals, so Avaya
recommends that you always put tone in this field.
9
Press
ENTER
You assign phones to a PCOL group by administering a CO Line button on each phone. Once assigned,
the Assigned Members page of the Personal CO Line Group screen displays member phones:
ASSIGNED MEMBERS (Stations with a button for this PCOL Group)
Ext
1:
2:
3:
4:
5:
6:
7:
8:
More information
Call Detail Recording
Call detail recording (CDR) can be activated for calls on a personal CO line, but the CDR record does not
specifically identify the call as PCOL. Calls over personal CO lines can, however, be identified by the
trunk access code used on the call. The call is recorded to the extension number assigned to the phone
where the call was originated or answered.
Restrictions
•
Abbreviated Dialing can be used with a personal CO line, but the accessed lists are associated
with the individual phones.
•
Auto Hold and Leave Word Calling do not work with calls on a personal CO line.
•
Send All Calls cannot be activated for a personal CO line.
•
INTUITY AUDIX cannot be in the coverage path of a PCOL group.
•
Only phones in the same PCOL group can bridge onto calls on the personal CO line. If a user is
active on his or her primary extension number on a PCOL call, bridged call appearances of that
extension number cannot be used to bridge onto the call.
•
When a user puts a call on hold on a personal CO line, the status lamp associated with the PCOL
button does not track the busy/idle status of the line.
Administrator's Guide for Avaya Communication Manager
November 2003
field, type tone.
to save your changes.
PERSONAL CO LINE GROUP
Name
Adding a PCOL Trunk Group
Page 2 of X
Ext Name
9:
10:
11:
12:
13:
14:
15:
16:
Managing Trunks
357