Siemens G130 List Manual page 432

2 Parameters
2.2 List of parameters
r1638 Current model magnetizing current q axis / I_mod I_mag q-ax
VECTOR_G (n/M) Can be changed: -
Data type: FloatingPoint32
P-Group: Closed-loop control
Not for motor type: ASM, PMSM, REL
Min
- [Arms]
Description: Displays the magnetizing current of the current model in the q-axis.
r1639 CO: Current model Isq after actual value tracking / I_mod Isq track
VECTOR_G (n/M) Can be changed: -
Data type: FloatingPoint32
P-Group: Closed-loop control
Not for motor type: ASM, PMSM, REL
Min
- [Arms]
Description: Displays the stator current in the q axis after the current actual value tracking.
p1640[0...n] CI: Excitation current actual value signal source / I_exc_ActVal S_src
VECTOR_G (n/M) Can be changed: T
Data type: Unsigned32 / FloatingPoint32
P-Group: Closed-loop control
Not for motor type: ASM, PMSM, REL
Min
-
Description: Sets the signal source for the excitation current actual value
r1641[0...1] Excitation current actual value / I_exc_act val
VECTOR_G (n/M) Can be changed: -
Data type: FloatingPoint32
P-Group: Closed-loop control
Not for motor type: ASM, PMSM, REL
Min
- [%]
Description: Displays the excitation current actual value that is read in.
Index: [0] = Excitation current of the excitation equipment
[1] = Excitation current for direct excitation
Dependency: Refer to: p0390
Note: The following applies for index 0:
For direct excitation, the value is referred to p0390. For brushless excitation, the value is referred to p0690.
The following applies for index 1:
The value is referred to p0390.
p1642[0...n] Minimum excitation current / Min I_exc
VECTOR_G (n/M) Can be changed: U, T
Data type: FloatingPoint32
P-Group: Closed-loop control
Not for motor type: ASM, PMSM, REL
Min
0.1 [%]
Description: Sets the minimum excitation current.
This means that negative excitation currents can be avoided.
432
Calculated: -
Dyn. index: -
Unit group: 6_2
Scaling: p2002
Max
- [Arms]
Calculated: -
Dyn. index: -
Unit group: 6_2
Scaling: p2002
Max
- [Arms]
Calculated: -
Dyn. index: CDS, p0170
Unit group: -
Scaling: PERCENT
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: PERCENT
Max
- [%]
Calculated: -
Dyn. index: DDS, p0180
Unit group: -
Scaling: -
Max
50.0 [%]
List Manual (LH2), 07/2016, A5E03263479A
Access level: 4
Func. diagram: 6727
Unit selection: p0505
Expert list: 1
Factory setting
- [Arms]
Access level: 4
Func. diagram: 6727
Unit selection: p0505
Expert list: 1
Factory setting
- [Arms]
Access level: 3
Func. diagram: 6727
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: 6727, 8020
Unit selection: -
Expert list: 1
Factory setting
- [%]
Access level: 4
Func. diagram: 6727
Unit selection: -
Expert list: 1
Factory setting
5.0 [%]
SINAMICS G130/G150