Siemens G130 List Manual page 707

p4724[0...1] Trace average in the time range / Trace average
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Unsigned8
CU_G130_DP,
P-Group: Trace and function generator
CU_G150_DP
Not for motor type: -
Min
0000 bin
Description: Sets the averaging in the time range for the trace.
Index: [0] = Trace 0
[1] = Trace 1
r4725[0...1] Trace data type 1 traced / Trace rec type 1
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned32
CU_G130_DP,
P-Group: Trace and function generator
CU_G150_DP
Not for motor type: -
Min
-
Description: Displays the recorded data type 1 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
r4726[0...1] Trace data type 2 traced / Trace rec type 2
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned32
CU_G130_DP,
P-Group: Trace and function generator
CU_G150_DP
Not for motor type: -
Min
-
Description: Displays the recorded data type 2 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
r4727[0...1] Trace data type 3 traced / Trace rec type 3
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned32
CU_G130_DP,
P-Group: Trace and function generator
CU_G150_DP
Not for motor type: -
Min
-
Description: Displays the recorded data type 3 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
0001 bin
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0000 bin
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
707