Siemens G130 List Manual page 28

2 Parameters
2.1 Overview of parameters
Not for motor type
Specifies for which motor type this parameter has no significance
ASM
PMSM
REL
RESM
SESM
Normalization
Specification of the reference variable with which a signal value is automatically converted for
a BICO interconnection.
The following reference variables are available:
• p2000 ... p2007: Reference speed, reference voltage, etc.
• PERCENT: 1.0 = 100 %
• 4000H: 4000 hex = 100 % (wort) or 4000 0000 hex = 100 % (double word)
• p0514: specific normalization
Expert list
Specifies whether this parameter is available in the expert list of the specified drive objects in
the commissioning software.
1: Parameter exists in the expert list.
0: Parameter does not exist in the expert list.
NOTICE
Users assume full responsibility for using parameters marked "Expert list: 0" (parameter does
not exist in the expert list).
These parameters and their functionalities have not been tested and no further user
documentation is available for them (e.g. description of functions). Moreover, no support is
provided for these parameters by "Technical Support" (hotline).
Description
Explanation of the function of a parameter
Values
Lists the possible values of a parameter.
Recommendation
Information about recommended settings.
28
: Induction motor
: Permanent-magnet synchronous motor
: Reluctance motor textiles / SIEMOSYN motor
: Synchronous reluctance motor
: Separately-excited synchronous motor
Refer to the description for p0514[0...9] and p0515[0...19] to p0524[0...19]
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A