Siemens G130 List Manual page 879

r8913[0...3] IE Subnet Mask actual / IE Subnet Mask act
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned8
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Displays the actual subnet mask for the Industrial Ethernet interface (X127) on the Control Unit.
r8914 IE DHCP mode actual / IE DHCP mode act
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Integer16
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Displays the actual DHCP mode for the Industrial Ethernet interface (X127) on the Control Unit.
Value: 0:
2:
3:
r8915[0...5] IE MAC address / IE MAC addr
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned8
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0000 hex
Description: Displays the MAC address for the Industrial Ethernet interface (X127) on the Control Unit.
p8920[0...239] PN Name of Station / PN Name Stat
CU_G130_PN, Can be changed: U, T
CU_G150_PN
Data type: Unsigned8
P-Group: -
Not for motor type: -
Min
-
Description: Sets the station name for the onboard PROFINET interface on the Control Unit.
The actual station name is displayed in r8930.
Dependency: Refer to: p8925, r8930
Note: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
The interface configuration (p8920 and following) is activated with p8925.
The parameter is not influenced by setting the factory setting.
PN: PROFINET
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
DHCP off
DHCP on, identification using MAC address
DHCP on, identification via name of station
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
255
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
3
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
00FF hex
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
879