Siemens G130 List Manual page 589

p3103 UTC synchronization process / UTC sync_process
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Integer16
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
0
Description: Setting the synchronization process.
Value: 0:
1:
2:
3:
Dependency: Refer to: p3101, p3104
Note: For p3103 = 0:
The PING/SNAP technique allows the UTC time to be set with a high degree of accuracy using p3104 and p3101.
For additional information, see SINAMICS S120 Function Manual Drive Functions (FH1).
For p3103 = 2:
Simply setting the UTC time via p3101.
p3104 BI: UTC PING synchronization / UTC PING sync
CU_G130_PN, Can be changed: U, T
CU_G150_PN,
Data type: Unsigned32 / Binary
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
-
Description: Sets the signal source for the PING event to set the UTC time.
Notice: The parameter may be protected as a result of p0922 or p2079 and cannot be changed.
r3107[0...3] UTC synchronization time out of tolerance / UTC t_sync out tol
CU_G130_PN, Can be changed: -
CU_G150_PN,
Data type: Unsigned32
CU_G130_DP,
P-Group: -
CU_G150_DP
Not for motor type: -
Min
-
Description: Displays the last synchronizing event that was out of tolerance.
Index: [0] = Milliseconds after sync
[1] = Days after sync
[2] = Milliseconds before sync
[3] = Days before sync
Dependency: Refer to: p3109
Refer to: A01099
Note: For r3107[0, 1]:
Displays the UTC time after synchronization.
For 3107[2, 3]:
Displays the UTC time before synchronization.
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
PING/SNAP
Reserved
Parameter
Reserved
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
3
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Unit group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
0
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
589