Installation Checklist - AGFA CR 30-X Service Manual

DD+DIS150.06E
8

Installation Checklist

# Step
Prerequisites for Installation:
1. Checking the Installation Site Prerequisites
2. Preparing the required Tools
Inspection and Unpacking:
3. Checking the Packing for obvious Damage
4. Unpacking the Digitizer
5. Checking the Shipment Completeness
Performing Digitizer Setup:
6. Mounting the Distance Holder
7. Connecting the Cables
8. Switching the Digitizer on
Configuring Digitizer Settings:
9. Filling in of Site specific Data
10. Checking Software Version
11. Configuring Maintenance Indicator
Setting the Digitizer operational:
12. Checking the Technical Image Quality of the System
Completing the Digitizer Installation:
13. Performing a Backup
14. Hand-over of the System to the Clinical Application
Specialist
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2009
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Section
2.1
2.2
3.1
3.2
3.3
4.1
4.2
4.3
5.1
5.2
5.3
6.1
7.1
7.2
Chapter 1 / 24
Agfa Company Confidential
Okay