Replacing The Top Cover - AGFA CR 30-X Service Manual

DD+DIS150.06E
(1) Switch on the digitizer.
Verification:
(2) Wait till the green light at the user interface lights up
(takes approx. 1,5 min.).
The right cover is replaced.
Result:
1.4

Replacing the Top Cover

REQUIRED SPARE PART*:
Type 5175/100: CM+9 5175 9200 0
Type 5175/110: CM+9 5175 1540 0
* The last digit in the spare part number indicates the spare
part revision at release of this document. When ordering,
the actual revision of the spare part is delivered.
REQUIRED TOOLS:
REQUIRED TIME:
5 min.
DISASSEMBLY:
(1) Switch off the digitizer.
(2) Disconnect the mains cable.
(3) Simultaneously press the two buttons (A)
positioned underneath the feed table.
(4) Pull out cassette unit (B).
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
3 mm,
with ball-shaped head
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Replacements / Repair Procedures
B
A
Agfa Company Confidential
Figure 16
A
Figure 17
Chapter 3.5 / 11