Software Release Cre_1703; New Features Of Software Cre_1703 - AGFA CR 30-X Service Manual

DD+DIS150.06E
12

Software Release CRE_1703

Type of new Software
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
*Note:
On MedNet, GSO Library always the latest available software release can be
downloaded.
12.1

New Features of Software CRE_1703


Support of cassette format 35 x 35 cm for digitizers as of SN 30.000 (Type
5175/100) and SN 40.000 (Type 5175/110).

Support of new version of Optic Module, which is planned to be introduced
in Q II / 2010

Improved error messages
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
01-2011
Software Upgrade
03/2010
5175/100 SN ≥ 30.000
5175/110 SN ≥ 40.000
MEDNET, GSO Library* (25 MB size)
Software CRE_1703 has only been released with
processing station software NX 2.0.6805 SU1 and SU2.
Together with software upgrade CRE_1703 it is
mandatory to upgrade to NX 2.0.6805 SU1 or SU2, too, if
not yet done earlier.
DD+DIS068.10E, Service Bulletin No. 38, Software
CRE_1703 available
NOTE:
To be able to clearly determine whether a digitizer supports cassette
format 35 x 35 cm, the serial numbers for digitizers with this feature
start with SN 30.000 (Type 5175/100) and SN 40.000 (Type 5175/110).
It is not possible to modify a digitizer below SN 30.000 (Type 5175/100)
and SN 40.000 (Type 5175/110) to accept 35 x 35 cm cassettes.
See Service Bulletin No. 39, Digitizer supports 35 x 35 cm Cassettes.
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Repair and Service
Software Releases and Patches
(Intranet Link / Extranet
Agfa Company Confidential
Link)
Chapter 3.8 / 23