AGFA CR 30-X Service Manual page 369

DD+DIS171.06E
►
Purpose of this Document
This document contains all routines and tests to be carried out during maintenance.
It describes all must maintenance periodical steps in chronological suitable order.
►
Document History
Edition.
Revision
1.1
►
Referenced Documents
Document
DD+DIS150.06E
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
01-2009
Release Changes
Date compared to previous Version 1.0
•
01-2009
Removed E-Label analysis, as this is part of infocounter
analysis.
•
Added image quality check before maintenance. See
section 2.6.
•
Added visual inspection of cables at left hand side
cassette unit. See section 3.1.
•
Added visual inspection of Teflon tape for cassette
fixation steel band. See section 3.4.
•
Added greasing of the spindle of the cassette fixation
unit. See section 3.5.
•
Removed cleaning of image plates, as this is a
customer task.
•
Added stall calibration for all motors. See section 4.1.
Title
CR 30-X Service Manual
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Maintenance
Chapter 9 / 3
Agfa Company Confidential