AGFA CR 30-X Service Manual page 366

DD+DIS147.08E
19 All-in-One Cart available
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
20 Introduction Software CRE_1509
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
05-2008
Manufacturing Standard Modifications
Cart allows integration of digitizer, NX processing station and UPS.
Optional for digitizers 5175/100 and 5175/110
Available as of April 2008
ABC-Code new: E2M3H
Service Bulletin # 24, DD+DIS110.08E
New functions:
•
Supports PMI boards as well as the new PMI2 boards.
•
Has a mechanism implemented to allow selection of type of
replacement for spare parts with an E-Label. Type of
replacement is either complete module or printed circuit
board only.
Digitizer type 5175/100:
Digitizer type 5175/110:
Not available via spare part channel, only via GSO library.
Service Bulletin # 23, DD+DIS063.08E
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
SN ≥ 3626
SN ≥ 6132
Chapter 8 / 12
Agfa Company Confidential