AGFA CR 30-X Service Manual page 364

DD+DIS147.08E
14 Modified Calibration Board
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
15 Introduction Software CRE_1309
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
05-2008
Manufacturing Standard Modifications
Prevention of electrostatic discharge during scan.
Digitizer type 5175/100:
CM+8.5175.2470.2
Service Bulletin # 12, DD+DIS148.07E
Improvement of IP Handling and Communication with NX.
Digitizer type 5175/100:
Software CRE_1309 is part of service kit CM+9 5175 9130 0 (See
CR 30-X Service Bulletin No. 12).
It is also available via MEDNET, GSO Library
Service Bulletin # 13, DD+DIS158.07E
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
SN ≥ 1816, plus 1668, 1679, 1692, 1721,
1726, 1730, 1731, 1745, 1750, 1753,
1770, 1779, 1780, 1786, 1790, 1793,
1795, 1799, 1800, 1802, 1804, 1809,
1812, 1813, 1814,
SN ≥ 1816 plus 1668, 1679, 1692, 1721,
1726, 1730, 1731, 1745, 1750, 1753,
1770, 1779, 1780, 1786, 1790, 1793,
1795, 1799, 1800, 1802, 1804, 1809,
1812, 1813, 1814
Agfa Company Confidential
Chapter 8 / 10