AGFA CR 30-X Service Manual page 243

DD+DIS150.06E
DISASSEMBLY:
(1) Switch off the digitizer.
(2) Remove all cables in the rear.
(3) Simultaneously press the two buttons (A)
positioned underneath the feed table.
(4) Pull out cassette unit (B).
(5) Remove 3 screws of the top cover.
(6) Remove top cover.
(7) Remove 3 screws of the left cover.
(8) Remove left cover.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
B
A
Figure 242
Figure 243
Figure 244
Chapter 3.5 / 101
Agfa Company Confidential
A