AGFA CR 30-X Service Manual page 361

DD+DIS147.08E
7 Modified FireWire Connector in the Rear
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
8 Modified Locking Pin of Cassette Locking Unit
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
9 Introduction of Distance Holder in the Rear
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
05-2008
Manufacturing Standard Modifications
To prevent inserting the FireWire Connector the wrong way.
Digitizer type 5175/100:
Not available as spare part: Production mounted a cable tie around
the connector.
Service Bulletin # 11, DD+DIS101.07E
Improvement of reliability for opening and closing of the cassette.
Digitizer type 5175/100:
Not available as spare part, only available as part of Service Kit
CM+9 5175 9130 0.
Service Bulletin # 12, DD+DIS148.07E
To prevent that FireWire cable can be damaged by pushing the
digitiser too close to the wall.
Digitizer type 5175/100:
Not available as spare part, only available as part of Service Kit
CM+9 5175 9130 0.
Service Bulletin # 12, DD+DIS148.07E
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
SN ≥ 1532
SN ≥ 1634 plus 1595, 1610, 1626
SN ≥ 1813 plus 1668, 1679, 1692,
1721, 1726, 1730, 1731, 1745, 1750,
1753, 1770, 1779, 1780, 1786, 1790,
1793, 1795, 1799, 1800, 1802, 1804,
1809, 1812.
Agfa Company Confidential
Chapter 8 / 7