AGFA CR 30-X Service Manual page 428

DD+DIS172.06E
9.11.5 Dimensions Pallet
Parameter
Length / depth (cm / inch)
Width (cm / inch)
Height (cm / inch)
10 Safety Standards
The digitizer complies with:

The general safety regulations:
IEC 60601-1:1988 + A1:1991 + A2:1995,
o
IEC 60601-1-1:2000 / EN 60601-1-1:2001,
o
IEC 60601-1-4:1999 / EN 60601-1-4:1996 + A1:1999,
o
IEC 60601-1-2: 2001 / EN 60601-1-2:2001,
o
UL 60601-1:2003,
o
CAN/CSA C22.2 No. 601.1
o

The laser safety regulations:
IEC 60825-1:2001 / EN 60825-1:1994 + A1:2002 + A2:2001,
o
DHHS/FDA 21 CFR, Parts 1040.10 and 1040.11;
o
EN 540: 1993,
o
EN 980: 2003,
o
EN 1041: 1998,
o
ISO 18906: 2000,
o
EN ISO 13485: 2003;
o
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2010
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Installation Planning
Value
90 / 35.4
80 / 31.5
15 / 6
Chapter 11 / 26
Agfa Company Confidential
1 2 3