Unpacking The Digitizer - AGFA CR 30-X Service Manual

DD+DIS150.06E
3.2

Unpacking the Digitizer

(1) Unpack the digitizer. The unpacking instructions are printed on the digitizer box.
Figure 1 shows an example of the unpacking instructions.
WARNING:
The digitizer is heavy (98 kg; 216.1 lb). Risk of injuries when lifting the digitizer.

At least three people have to lift the digitizer from one position to the other.

Use proper shoe and hand protection when lifting the digitizer.
WARNING:
Excessive vibrations during scanning may decrease image quality.
The structure and stability of the used table need to be suitable in relation with the
size and weight of the system. The table may not be subject to excessive shock and
vibrations from other sources.
For more information refer to the Installation Planning document DD+DIS172.06E
(Intranet Link
(2) Lift the digitizer from the pallet on the provided table.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2009
Controls, Connections, and Setup Procedures
Figure 1: Example for unpacking instructions on the digitizer box
/ Extranet Link).
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Chapter 1 / 7
Agfa Company Confidential