Service Client Menu "E-Label - AGFA CR 30-X Service Manual

DD+DIS150.06E
2.2.2

Service Client Menu "E-Label"

The 'E-labels' (used in 5 different modules, see Figure 9) keep device and module
Purpose
specific data, like module serial number, last error codes or module specific
parameters.
Purpose of the E-Labels:

Keep module specific data to adjust settings in the digitizer automatically.

Ensure automatic tracking of module exchange (automatic infocounter entries).

Allow fault investigations in production, as the returned, defective module has all
required data in the E-Label.
(1) Select "General Device Info - E-Label".
Usage
(2) Select the desired E-Label to view the contents.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2010
Figure 9
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Tools and auxiliary Means
Agfa Company Confidential
Chapter 3.2 / 13