AGFA CR 30-X Service Manual page 394

DD+DIS171.06E
5 Completion of the Maintenance
5.1 Reset of the Maintenance Indicator
IMPORTANT
This step is only required, if the "maintenance indicator" is activated.
If the maintenance indicator is activated, a user message "Preventive Maintenance
required" pops-up at the NX workstation if 12.000 IP cycles or 1 year are over since
the last reset of the maintenance indicator.
(1) In the CR30-X service client select "Maintenance Indicator".
(2) Select "Confirm" at "Reset of Maintenance Indicator".
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
01-2009
Figure 29
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Maintenance
Chapter 9 / 28
Agfa Company Confidential