AGFA CR 30-X Service Manual page 35

H C
EALTH ARE
Imaging Services
Document No: DD+DIS150.06E
►
Purpose of this Document
This document describes:

All important routines to be carried out prior to putting the machine in operation

Location and function of the controls and connectors of the machine

All routines necessary to put an unpacked machine in operation
►
Document History
Edition.
Revision
1.5
►
Referenced Documents
Document
DD+DIS287.09E
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2009 printed in Germany
Agfa Company Confidential
Release Changes
Date compared to previous Version 1.4:
 Added step to configure maintanence indicator. Details
11-2009
see section 5.3.
 Added step to perform a backup. Details see section 7.1.
 Removed step to fill in "Site and System Data" and
"Installation Report" Forms.
 Removed step to register digitizer at installation, as this is
not required anymore with software ≥ CRE_1607.
Title
CR 30-X Service Bulletin No. 30 - Software CRE_1607
available
DOCUMENT CONTROL NOTE:
Document Node ID: 14352492
eq_01_setup_procedure_e_template_v07
Copyright © 2009 Agfa HealthCare N.V.
Controls, Connections,
and Setup Procedures
Type 5175 / 100/110
Chapter 1
CR 30-X