Checking The Teflon Tape And Cassette Fixation Steel Band At The Cassette Unit - AGFA CR 30-X Service Manual

DD+DIS171.06E
3.4 Checking the Teflon Tape and Cassette Fixation Steel Band at the
Cassette Unit
Note:
The Teflon tape is only installed in digitizers manufactured till October 2008.
(1) Check the condition of the Teflon tape and the cassette fixation steel band in the
cassette unit:
•
The Teflon tape may not show any signs of wear.
•
The cassette fixation steel band may not show any bend or sticking part coming
from the Teflon tape.
(2) If one of the parts is not in perfect condition:
● Replace the Teflon tape by the slide bar, which is part of delivery of the
"Cassette Fixation Steel Band", spare part number: CM+9 5175 5830 1
For details see instructions which are part of delivery of the spare part.
● Clean the steel band with alcohol or replace it if is bent.
Cassette unit rear side view
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
01-2009
Teflon Tape
Figure 15: Teflon tape
DOCUMENT CONTROL NOTE:
Type 5175 / 100/110
Figure 16: Sticking parts at the cassette
CR 30-X
Maintenance
fixation steel band
Chapter 9 / 17
Agfa Company Confidential