Software Release Cre_1607A; New Features Of Software Cre_1607A - AGFA CR 30-X Service Manual

DD+DIS150.06E
11

Software Release CRE_1607A

Type of new Software
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
*Note:
On MedNet, GSO Library always the latest available software release can be
downloaded.
11.1

New Features of Software CRE_1607A

Software CRE_1607A contains following new features:

"Speed class free" (SCF) operation combined with automatic erasure dose
detection: This feature simplifies configuration work at the NX workstation to adapt
the system to the customer needs.

Improved error message descriptions for the ten most frequent error messages
(HQ_0902090001)

Implemented an improved test algorithm to detect a defective laser diode (Error
14855): This helps troubleshooting when no laser beam is detected by the
calibration board.

Improved algorithm for stall calibration for all related drives (HQ_0811250003).

Maintenance indicator can be configured to appear after a number of cycles or a
certain time frame. Before it was fixed (when activated) to appear after 12.000
cycles or one year.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
01-2011
Software Upgrade
12/2009
5175/100 SN ≥ 8460 and SN ≥ 10016 (Type 5175/100
"Speed Class free")
5175/110 SN ≥ 6560 and SN ≥ 20001 (Type 5175/110
"Speed Class free")
MEDNET, GSO Library* (25 MB size)
Software CRE_1607A has only been released with
processing station software NX 2.0.6805 SU1 and SU2.
Together with software upgrade CRE_1607A it is
mandatory to upgrade to NX 2.0.6805 SU1 or SU2, too, if
not yet done earlier.
DD+DIS333.09E, Service Bulletin No. 32, Software
CRE_1607A available
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Repair and Service
Software Releases and Patches
(Intranet Link /
Agfa Company Confidential
Extranet Link)
Chapter 3.8 / 19