AGFA CR 30-X Service Manual page 213

DD+DIS150.06E
(24) Remove 2 screws of upper part transport
unit left hand side.
(25) Take off upper part transport unit.
(26) With a screwdriver remove two ball
bearings at transport unit left hand side.
(27) Remove two ball bearings at transport unit
right hand side.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 174
Figure 175
Figure 176
Figure 177
Chapter 3.5 / 71
Agfa Company Confidential