New Features Of Software Cre_1511; Software Release Cre_1607 - AGFA CR 30-X Service Manual

DD+DIS150.06E
9.1

New Features of Software CRE_1511

Software CRE_1511 supports the new service client function "Check laser beam
position". This function is required for the Laser Beam Detection Toolkit, spare part
number*: CM+9 5175 2940 0
* The last digit in the spare part number indicates the spare part revision at release of
this document. When ordering, the actual revision of the spare part is delivered.
10

Software Release CRE_1607

Type of new Software
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
*Note:
Software CRE_1607 was available on MedNet only a few days. Soon after release it
was superseeded by software CRE_1607A. See next section for details.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
01-2011
Software Upgrade
11/2009
5175/100 SN ≥ 8373 and type 5175/110 SN ≥ 6482
MEDNET, GSO Library* (25 MB size)
Software CRE_1607 has only been released with
processing station software NX 2.0.6805 SU1 and SU2.
Together with software upgrade CRE_1511 it is
mandatory to upgrade to NX 2.0.6805 SU1 or SU2, too, if
not yet done earlier.
DD+DIS287.09E, Service Bulletin No. 30, Software
CRE_1607 available (obsolete document)
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Repair and Service
Software Releases and Patches
Agfa Company Confidential
Chapter 3.8 / 18