Machine Specific Tools; Required Tools - AGFA CR 30-X Service Manual

DD+DIS150.06E
1

Machine specific Tools

The listing of machine specific tools is divided in required tools and
recommended tools.
Required tools: They are required for installation, repair or troubleshooting.
Recommended tools: They may facilitate installation, repair or troubleshooting.
1.1

Required Tools

In addition to the conventional service tools which every service engineer has in his
toolbox, the following tools are required for service on the digitizer:
Tool
Anti-static wrist strap
CR Screen Cleaner
(2 bottles)
Lint free cloth
Service key
Vacuum Cleaner
Dirt bags for vacuum
cleaner (10 x)
* The last digit in the spare part number indicates the spare part revision at release of
this document. When ordering, the actual revision of the spare part is delivered.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2010
Part Number*
CM+9 9999 0830 0
10+9 9999 1197 0
Commercially available
CM+9 0426 6309 0
Commercially available or
CM+9 9999 0895 0
(Vacuum cleaner
220/240V, 50Hz)
CM+9 9999 0896 0
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Tools and auxiliary Means
Purpose
To avoid static discharges
on electronic components.
To clean the Image Plates.
To clean the Image Plates.
To override the safety
switch.
To clean the digitizer during
maintenance.
To clean the digitizer during
maintenance. Fits to
Vacuum Cleaner
CM+9 9999 0895 0
Agfa Company Confidential
Chapter 3.2 / 4