DD+DIS150.06E
(7)
Press two handles and pull out front cover
approx. 5 cm.
(8)
Disconnect cable at user interface board.
See Figure 135.
(9)
Disconnect ground cable at left hand side.
(10) Disconnect ground cable at right hand side.
(11) Remove front cover.
(16) Remove cable at plug P25 of IP handling
board.
(17) Open cable holders.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 135
Figure 136
Figure 137
Figure 138
Chapter 3.5 / 57
Agfa Company Confidential