AGFA CR 30-X Service Manual page 170

DD+DIS150.06E
(20) Cut two cable ties at upper part transport
unit right hand side.
(21) Cut one cable tie at upper part transport
unit cable harness left hand side.
(22) Remove 2 screws of upper part transport
unit right hand side.
(23) Remove 2 screws of upper part transport
unit left hand side.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 63
Figure 64
Figure 65
Figure 66
Chapter 3.5 / 28
Agfa Company Confidential