Reset Of The Relative Counters - AGFA CR 30-X Service Manual

DD+DIS171.06E
2.5

Reset of the Relative Counters

(1) In the Infocounter select the node "Entire device".
(2) Select tab "Counters".
(3) Select all events (select upper most event, then select lowest event with the shift
key pressed).
(4) Select "Reset Counter".
(5) Repeat steps 3 and 4 for all other nodes.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
01-2009
Figure 2
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Maintenance
Chapter 9 / 10
Agfa Company Confidential