Erasing The Cassette - AGFA CR 30-X Service Manual

DD+DIS150.06E
6.1.2

Erasing the Cassette

(1) Press the Erase button.
The Digitizer switches to erase
mode.
The status indicator is continuously
lighting up in blue.
(2) Put the cassette in the digitizer:
Erasing starts.
(3) Remove the cassette with the erased image plate from the cassette output.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2009
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
517501eg.cdr
Figure 18: Digitizer erase button
2
517501fg.cdr
Figure 19
Agfa Company Confidential
1
Chapter 1 / 18