Replacing The Slow Scan Unit; Replacing The Esd Brush; Replacements At The Mounting Rack; Replacing The Cassette Unit Open Safety Switch - AGFA CR 30-X Service Manual

DD+DIS150.06E
3.8

Replacing the Slow Scan Unit

The replacement instructions for the Slow Scan Unit, spare part number*
CM+9 5175 2400 0, are enclosed to the spare part.
* The last digit in the spare part number indicates the spare part revision at release of this document.
When ordering, the actual revision of the spare part is delivered.
3.9

Replacing the ESD Brush

The replacement instructions for the ESD Brush, spare part number*
CM+9 5175 9080 1, are enclosed to the spare part.
* The last digit in the spare part number indicates the spare part revision at release of this document.
When ordering, the actual revision of the spare part is delivered.
4

Replacements at the Mounting Rack

4.1

Replacing the Cassette Unit open Safety Switch

REQUIRED SPARE PART*:
CM+9 0426 6304 0
* The last digit in the spare part number indicates the spare
part revision at release of this document. When ordering,
the actual revision of the spare part is delivered.
REQUIRED TOOLS:
REQUIRED TIME:
60 min.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
3 mm
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Replacements / Repair Procedures
5 mm
Agfa Company Confidential
Figure 229
Chapter 3.5 / 94