AGFA CR 30-X Service Manual page 90

DD+DIS150 .06E
NOTE:
With covers closed the digitizer is a Class 1
laser product and not dangerous to the human
eye or skin.
CAUTION:
Risk of damage of the PMI board if FireWire
connector is inserted wrong.
Insert the FireWire connector in the rear as
indicated on the sticker.
WARNING:
The erasure unit is hot - up to 200 °C: Risk
of burns.
Avoid contact with the Erasure Unit.
Observe the relevant sticker on the Erasure
Unit.
WARNING:
Improper ground connections inside the
device may lead to electric shocks.
Make sure, that the grounding connection to
the digitizer frame is present.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
04-2009
Safety Guidelines / Gene
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
Repair and Service
ral Repair Instruction
Figure 6
Connector
Direction
FireWire
Figure 7
Figure 8
Figure 9
Chapter 3.1 / 6
Agfa Company Confidential