AGFA CR 30-X Service Manual page 397

DD+DIS171.06E
6 Maintenance Checklist
Work Instruction for order no.
The maintenance has to be carried out:
Every 12 months or 12 000 image plate cycles
NOTE:
Maintenance must be carried out according to the maintenance instructions
DD+DIS171.06E
Diagnostics
Questioning of the
customer
Checking images on
the workstation
Error statistics
Infocounter analysis
Reset of the Relative
Counters
Checking current
Image Quality
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
01-2009
• Questioning of the customer about problems with
the digitizer
• Checking the last 20 to 40 images for image
quality problems
• Read-out and analyzation of the error statistics
• Read-out and analyzation of the infocounter
• Reset of relative counters of all nodes
• Exposure and print or archive of a flatfield
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Maintenance
Maintenance Checklist
SN
Agfa Company Confidential
Film cycles
Done
Chapter 9 / 31