AGFA CR 30-X Service Manual page 78

DD+DIS125.08E
1.1 Software / Hardware Compatibility Chart up to System Version 13 (≤ CRE_1509)
System Version 001 002
Digitizer Software
CRE_1010A CRE_1206
System changes Initial release Introduction
compared to previous CRE_1206
version
DIGITIZER
CR 30-X Tpye 5175/100
Digitizer Type 5175/110
Digitizer Model Files
Speedclass free,
CR30SCF.XML V2.1.0.0
Speedclass operation,
CR30.XML V2.1.0.0
4)
Speedclass free,
CR30SCF.XML V2.2.0.0
4)
Speedclass operation,
CR30.XML V2.2.0.0
Workstation
NX 1.0 (SP1)
NX 1.0 (SP1 SU2)
NX 2.0
NX 2.0 (SU1)
NX 2.0 (SU2)
NX 2008 (DELL
Workstation)
NX 2008 (Laptop)
NX 2008 (HP 7800 )
NX 8000
NX 8200
NX 8300
Edition 1, Revision 5
01-2011
003 004 005
1)
CRE_1309 CRE_1309 CRE_1309 CRE_1309A
Introduction Introduction FLFS Phase 0 Introduction
CRE_1309 NX 2.0
Discovery
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Type 5175/100/105/110/120/125
005A 006 007 008
CRE_1405 CRE_1405 CRE_1405
Digitizer FLFS Phase 2 Introduction
1309A 5175/110 + license NX
FLFS phase 2 WHITE
LABEL
CR 30-X
Functional Description
Software / Hardware Compatibility Chart
009 010 011
CRE_1405 CRE_1405 CRE_1405
CRE_1509 CRE_1509 CRE_1509 CRE_1509
Introduction Introduction Introduction Introduction
CRE_1509 NX2008 RAID on NX 8000
NX2008
Agfa Company Confidential
012 013
CRE_1405
CRE_1509
Introduction
4)
NX 2008 on
HP DC7800
Chapter 2 / 4