AGFA CR 30-X Service Manual page 175

DD+DIS150.06E
(7) Press both handles and pull out front cover
approx. 5 cm.
(8) Disconnect cable at user interface board.
See Figure 78.
(9) Disconnect ground cable at left hand side.
(10) Disconnect ground cable at right hand side.
(11) Remove front cover.
(12) Remove cable at P30 of IP handling board.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 78
Figure 79
Figure 80
Figure 81
Chapter 3.5 / 33
Agfa Company Confidential