DD+DIS150.06E
(16) Slide IP guide plate to the left and lift it out.
(17) Disconnect cable at roller IP sensor.
(18) Open three cable holders at right hand
side.
(19) Open cable holders at left hand side.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 166
Figure 167
Figure 168
Figure 169
Chapter 3.5 / 69
Agfa Company Confidential