Service Client Menu "Backup & Restore - AGFA CR 30-X Service Manual

Type 5175/100/105/110/120/125
Hide thumbs Also See for CR 30-X:
Table of Contents

Advertisement

DD+DIS150.06E
2.2.18
Service Client Menu "Backup & Restore"
The menu "Backup & Restore" allows:
Purpose
To store device specific settings and other relevant data
logfiles etc.) in a backup Zip file (=Backup).
To restore device specific settings and information when required (=Restore).
Perform always a backup in the following cases:
At preventive maintenance
After replacements of parts
After software update or upgrade
A Restore is required in following cases:
After replacement of the processing station
After replacement of the hard disk on the processing station
After a "clean install procedure" on the processing station
1
A backup ZIP file contains following data: Device specific data (e.g. Serial Number, Module specific data,
calibration lines), Logfiles, Infocounter, Service Activity Logfile
IMPORTANT:
The backup of the digitizer data (=device specific settings and other relevant data) are
stored in a database in a directory on the control PC.
If the backup on the Control PC is lost (e.g. after exchange of the Control PC, Clean
Install Procedure etc.) the proper function of the digitizer is not guaranteed. An error
message like 4637 may pop-up which indicates that the serial number of the digitizer is
not known.
To have all data as up-to-date as possible after exchange of the Control PC or Clean
Install Procedure follow the basic rules:
Always make a backup after each service intervention unless only data have
been retrieved (e.g. viewing infocounter).
After replacement of the control PC or hard disk of the control PC proceed as
follows:
Step 1: Switch off digitizer.
Step 2: Restore the latest backup.
Step 3: Re-boot control PC.
Step 4: Switch on digitizer.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2010
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Tools and auxiliary Means
1
(e.g. infocounter,
Agfa Company Confidential
Chapter 3.2 / 32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents