Software Release Cre_1309; New Features And Improvements Of Software Cre_1309 - AGFA CR 30-X Service Manual

DD+DIS150.06E
5

Software Release CRE_1309

Type of new Software
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
*Note:
On MedNet, GSO Library always the latest available software release can be
downloaded.
5.1

New Features and Improvements of Software CRE_1309


Improved, more reliable IP handling

Improved stability of image quality to prevent "puzzled images" caused by
electrostatic discharge (additional to the mechanical changes in the digitizer which
were introduced with the mechanical service kit)

Improved communication synchronization between digitizer and control PC

Improved user messages
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
01-2011
Software Upgrade
05/2007
 1816 plus 1668, 1679, 1692, 1721, 1726, 1730, 1731,
1745, 1750, 1753, 1770, 1779, 1780, 1786, 1790, 1793,
1795, 1799, 1800, 1802, 1804, 1809, 1812, 1813, 1814

Part of service kit CM+9 5175 9130 0 (See CR 30-X
Service Bulletin No. 12

MEDNET, GSO Library* (8 MB size)
None

DD+DIS148.07E, Service Bulletin No. 12, Service
Kit CM+9 5175 9130 0 available to solve various
Problems

DD+DIS158.07E, Service Bulletin No. 13, Software
CRE_1309 available on MEDNET
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Repair and Service
Software Releases and Patches
Agfa Company Confidential
Chapter 3.8 / 9