AGFA CR 30-X Service Manual page 212

DD+DIS150.06E
(20) Cut two cable ties at upper part transport
unit right hand side.
(21) Cut one cable tie at upper part transport
unit cable harness left hand side.
(22) Unplug P4, P17, P25 and P29 at IP
handling board.
(23) Remove 2 screws of upper part transport
unit right hand side.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 170
Figure 171
Figure 172
Figure 173
Chapter 3.5 / 70
Agfa Company Confidential