Digitizer Service Client - AGFA CR 30-X Service Manual

DD+DIS150.06E
2

Digitizer Service Client

The "Service Client" is the service software for the digitizer.

It is installed on the processing station in production.

It also contains the device software (i.e. program files for the different nodes) for
the digitizer.

The up-to-date CR30-X service client is available via MEDNET GSO Library path:
Computed Radiography – CR Digitizers – CR30-X

It is started via menu: All Programs - Agfa CR 30-X - Service Client
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2010
Figure 2: CR30-X Service Client menus
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Tools and auxiliary Means
Agfa Company Confidential
Chapter 3.2 / 6