AGFA CR 30-X Service Manual page 191

DD+DIS150.06E
(6) Open 3 lower screws at front cover a few
turns.
(7) Press both handles and pull out front cover
approx. 5 cm.
(8) Disconnect cable at user interface board.
See Figure 115.
(9) Disconnect ground cable at left hand side.
(10) Disconnect ground cable at right hand side.
(11) Remove front cover.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
5175R3-5_004.cdr
Figure 114
Figure 115
Figure 116
Figure 117
Chapter 3.5 / 49
Agfa Company Confidential