Intended Use; Labels In And On The Device - AGFA CR 30-X Service Manual

DD+DIS150.06E
1

Intended Use

This device must only be used to scan exposed X-ray cassettes, containing an
erasable image plate (IP). The digitizer is part of a system, consisting of X-ray
cassettes with erasable phosphor image plates and a workstation where the X-ray
cassettes are identified and the resulting digital image information is further processed
and routed. It is intended that this device is only operated in a radiological environment
by qualified staff.
2

Labels in and on the Device

WARNING:
Risk of hand injuries if cassette edge sensor
is activated and hand or finger is inserted in
cassette entry.
• Keep fingers / hand away from cassette unit
entry when a cassette is inserted.
• Do not activate cassette edge sensor by
hand.
NOTE:
One sticker on the front cover indicates the
correct cassette positioning when inserting the
cassette.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1
04-2009
Safety Guidelines / General Repair Instruction
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
Repair and Service
Figure 1: Labels in the Front
517631ap.cdr
Figure 2
Chapter 3.1 / 4
Agfa Company Confidential