AGFA CR 30-X Service Manual page 360

DD+DIS147.08E
4 Added Ground Connection for Front Cover
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
5 Modified Safety Brackets for Prescan Roller
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
6 Modified segmented Transport roller and Added Erasure Unit
Guide Plate
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
05-2008
Manufacturing Standard Modifications
Improvement of overall ESD (electrostatic discharge) behaviour of
the digitiser.
Digitizer type 5175/100:
Not available as spare part, only available as part of Service Kit
CM+9 5175 9130 0.
Service Bulletin # 12, DD+DIS148.07E
To prvent that prescan rollers fall off during transport.
Digitizer type 5175/100:
Not available as spare part, only available as part of Service Kit
CM+9 5175 9130 0.
Service Bulletin # 12, DD+DIS148.07E
Improvement of IP run reliability.
Digitizer type 5175/100:
Not available as spare part, only available as part of Service Kit
CM+9 5175 9130 0.
Service Bulletin # 12, DD+DIS148.07E
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
SN ≥ 1610
SN ≥ 1633
SN ≥ 1568 plus 1495
Agfa Company Confidential
Chapter 8 / 6