Replacements In Cassette Unit; Replacing The Antistatic Brush Cassette Unit Entry - AGFA CR 30-X Service Manual

DD+DIS150.06E
2

Replacements in Cassette Unit

2.1

Replacing the Antistatic Brush Cassette Unit Entry

REQUIRED SPARE PART*:
CM+9 5160 5006 0
* The last digit in the spare part number indicates the spare
part revision at release of this document. When ordering,
the actual revision of the spare part is delivered.
REQUIRED TOOLS:
REQUIRED TIME:
90 min.
DISASSEMBLY:
(1) Switch off the digitizer.
(2) Disconnect the mains cable.
(3) Simultaneously press the two buttons (A)
positioned underneath the feed table.
(4) Pull out cassette unit (B).
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
3 mm,
with ball-shaped head
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Replacements / Repair Procedures
B
A
Agfa Company Confidential
Figure 19
2 mm
Medium size
A
Figure 20
Chapter 3.5 / 13