Product Description; System Overview - AGFA CR 30-X Service Manual

DD+DIS172.06E
2

Product Description

This is the Installation Planning Document for the CR 30-X digitizers type 5175,
subtypes 100, 105, 110, 120 and 125.
Name of the digitizers:

Subtypes 100, 105:

Subtypes 110, 120, 125:
All of the above mentioned subtypes are called "digitizer" in this document.
The differences between the different subtypes are described in section 9.
2.1

System Overview

The digitizer is part of the digitizer system, consisting of:

Digitizer

NX Workstation (Tower or laptop version)

Cassette with Image Plate (IP)
Optional Components (not displayed)

Printer (e.g. Drystar 5302)

Additional Cassettes

Uninterruptible Power Supply (UPS)
Digitizer
NOTE:
This document describes the installation planning of the digitizer.
For more information to the NX Workstation and optional printer refer to the
corresponding documents on MedNet, GSO Library.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
11-2010
CR 30-X
Digitizer (ex factory no name on the covers)
NX Workstation
Tower Version
Cassette
517511ea.cdr
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175/100/105/110/120/125
Installation Planning
Digitizer
Figure 1
Agfa Company Confidential
1 2
NX Workstation
Laptop Version
Cassette
Chapter 11 / 7
3