DD+DIS150.06E
(12) Disconnect all cables at the IP handling
board.
(13) Open the 6 mounting clips.
(14) Remove the IP handling board.
(15) Pull at the toothed belt to open the cassette
opener.
(16) Disconnect cable at chip reader.
(17) Remove screw.
(18) Remove chip reader.
ASSEMBLY:
(1)
Mount in reverse order.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 90
Figure 91
Figure 92
Chapter 3.5 / 37
Agfa Company Confidential
517536ak.cdr