AGFA CR 30-X Service Manual page 181

DD+DIS150.06E
REQUIRED TIME:
30 min.
DISASSEMBLY:
(1) Switch off the digitizer.
(2) Disconnect the mains cable.
(3) Simultaneously press the two buttons (A)
positioned underneath the feed table.
(4) Pull out cassette unit (B).
(5) Remove screw at erasure unit.
(6) Disconnect two cables at erasure unit.
(7) Take out erasure unit.
ASSEMBLY:
(1) Mount in reverse order.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
B
A
Figure 94
Figure 95
Chapter 3.5 / 39
Agfa Company Confidential
A