AGFA CR 30-X Service Manual page 365

DD+DIS147.08E
16 Introduction Software Patch CRE_1309A
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
17 Change of Manufacturer of internal FireWire Cable
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
18 Introduction Software CRE_1405
Reason
Product(s) &
Serial
Number(s)
Part
Number(s)
Referenced
Document(s)
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0
05-2008
Manufacturing Standard Modifications
Bugfix: Solution for sporadic error codes 10754, 10761 or 10767
that may appear with machines that were upgraded from
CRE_1206X to CRE_1309 in the field.
Digitizer type 5175/100:
Not available via spare part channel, only via GSO library.
Service Bulletin # 18, DD+DIS304.07E
Change of manufacturer of internal FireWire Cable.
Digitizer type 5175/100:
CM+9 0477 1087 X
Service Bulletin # 19, DD+DIS301.07E
•
Improved Full Leg / Full Spine (FLFS) functionality.
•
Support of new digitizer type 5175/110
Digitizer type 5175/100:
Digitizer type 5175/110:
Not available via spare part channel, only via GSO library.
Service Bulletin # 20, DD+DIS329.07E
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 /100/110
SN ≥ 2292 plus 2268
SN ≥ 2301
SN ≥ 2730
SN ≥ 6001
Chapter 8 / 11
Agfa Company Confidential