Table of Contents
Advertisement
DD+DIS160.02E
3
4
4.1
Edition 1, Revision 12
Scope of Delivery
The Full Leg/Full Spine Stand "ADC Easylift" consists of the following
assemblies:
•
Framework with Sprocket Holder
•
Counterweight
•
Slide wagon
•
Upper front cover
•
Lower front cover
and the following single parts packed in small PE-bags:
•
Handle, brake cable and sleeve
•
Belt and belt connection to slide wagon
•
Adjustable feet and holders
•
Cassette holder mounting set
•
Slide wagon locking screws
and documents:
•
installation manual
•
user manual
•
assembly checklist (please store on a secure place as this document
may be needed for later reference in case of trouble with the
ADC Easylift)
Installation Planning
A safe installation of ADC Easylift requires two technicians
Installation Site
Upon defining the installation site please take into account:
•
The ADC Easylift must be installed in front of a wall impervious to x-rays
•
The floor covering must be solid enough to stand the weight of the ADC
Easylift (approx. 100 kg)
•
The customer has to decide early enough if the ADC Easylift should be
operated from the left or right hand side.
•
On the operator's side a minimum of 50 cm free space is needed to be
able to insert large format cassettes
•
Make sure that you have at least 2 hours access to the x-ray room on the
day of installation
ADC System Components
(Type 4406)
HOME
Accessories
Chapter 6 / 5
Advertisement
Table of Contents
