Replacements At Scan Module; Replacing The Calibration Board; Replacing The Optic Module; Replacing The Pmi Power Distribution Board - AGFA CR 30-X Service Manual

DD+DIS150.06E
3

Replacements at Scan Module

3.1

Replacing the Calibration Board

The replacement instructions for the Calibration Board, spare part number*
CM+9 5175 2470 2, are enclosed to the spare part.
* The last digit in the spare part number indicates the spare part revision at release of this document.
When ordering, the actual revision of the spare part is delivered.
3.2

Replacing the Optic Module

The replacement instructions for the Optic Module, spare part number*
CM+9 5175 2750 0, are enclosed to the spare part.
* The last digit in the spare part number indicates the spare part revision at release of this document.
When ordering, the actual revision of the spare part is delivered.
3.3

Replacing the PMI Power Distribution Board

REQUIRED SPARE PART:
CM+9 5170 4960 0*
*0 in the spare part number indicates the spare part
revision at release of this document.
When ordering, a different revision of the spare part
may be delivered (e.g. 1).
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2009
Replacements / Repair Procedures
DOCUMENT CONTROL NOTE:
CR 30-X
Type 5175 / 100/110
Repair and Service
Figure 216
Chapter 3.5 / 87
Agfa Company Confidential