Software Release Cre_1405; New Features Of Software Cre_1405 - AGFA CR 30-X Service Manual

DD+DIS150.06E
7

Software Release CRE_1405

Type of new Software
Release Date
Digitizer SNs
Availability
Prerequisites
Reference Document
*Note:
On MedNet, GSO Library always the latest available software release can be
downloaded.
7.1

New Features of Software CRE_1405


Improved Full Leg / Full Spine (FLFS) functionality by
o
o

With software CRE_1405 a new digitizer with sub-type 5175/110 is released.
Functional difference: Reduced throughput for 35x43 cm cassettes from 70 IPs/h
(Type 5175/100) to 50 IPs/h (Type 5175/110). This digitizer is a "white label"
device without any indication of brand or name.
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 4
01-2011
Software Upgrade
11/2007
5175/100 SN ≥ 2730 and type 5175/110 SN ≥ 6001
MEDNET, GSO Library* (9 MB size)
Software CRE_1405 has only been tested with
processing station software NX 2.0.6805 SU1.
It is mandatory to make a software upgrade to NX
2.0.6805 SU1 (or higher version), too, if not yet done.
DD+DIS329.07E, Service Bulletin No. 20, Software
CRE_1405 released to support FLFSCassette and
"White Label Digitizer"
overscan of image plates that are used in FLFS cassettes
support of dedicated 35x43 cm FLFS cassettes. These cassettes have
approx. 10 mm of back-scatter protection removed to allow overlapping of
cassettes.
DOCUMENT CONTROL NOTE:
Type 5175/100/105/110/120/125
Software Releases and Patches
(Intranet Link
CR 30-X
Repair and Service
/ Extranet Link)
Chapter 3.8 / 11
Agfa Company Confidential